RoboTAPE - Aplicador Robótico de Cinta
El RoboTAPE es una solución patentada de cambio de juego para aplicar cinta en las mangas de forma totalmente automática y sin desperdicio de cinta debido a la cinta en espiral. Se elimina el encintado manual y cualquier error de encintado relacionado que cause un tiempo de inactividad de la prensa.
- Eliminar el desperdicio de cinta debido a la cinta en espiral
- Eliminar la aplicación manual de la cinta
- Reducir el tiempo de inactividad de la imprenta relacionado con el operador
- Eliminar las burbujas de aire y las superposiciones
- No más cortes en las mangas
- Eliminar el daño de la manga
![robotape video](https://www.flexologic.nl/wp-content/uploads/2020/06/video-thumbnail.jpg)
![close up taping](https://www.flexologic.nl/wp-content/uploads/2020/06/close-up-taping.jpg)
![robotape video](https://www.flexologic.nl/wp-content/uploads/2020/06/video-thumbnail.jpg)
![close up taping](https://www.flexologic.nl/wp-content/uploads/2020/06/close-up-taping.jpg)
Características de RoboTAPE
![robotic taping with robotape](https://www.flexologic.nl/wp-content/uploads/2020/06/1.fully-automatic-taping.jpg)
1
Robotic tape application
The RoboTAPE applies the tape fully automatically within 30 sec/sleeve. The spiral taping eliminates tape waste.
![](https://www.flexologic.nl/wp-content/uploads/2020/06/close-up-taping.jpg)
2
No air inclusions
The robotic taping eliminates the air bubbles and provides accurate and consistent taping application.
![](https://www.flexologic.nl/wp-content/uploads/2020/06/4.tape-roller-and-back-foil-winder.jpg)
3
Tape roller
The RoboTAPE has a tape roll of 250m length for applying the tape. The width of the tape is 230mm.
![](https://www.flexologic.nl/wp-content/uploads/2020/07/taping-station.jpg)
4
Taping station
The operator manually loads the sleeve/adapter on the mandrel of the taping station. When the tape application is completed by the robot, he can remove the taped sleeve.
![](https://www.flexologic.nl/wp-content/uploads/2020/07/robotape-safety-fence.jpg)
5
Safety fence
The robot is surrounded by a safety fence to protect the operator during the taping process.
![](https://www.flexologic.nl/wp-content/uploads/2020/06/8.HMI-CONSOLE-SAFETY-FENCE.jpg)
6
HMI console
The HMI console is used to set up jobs and start the taping process. XML files can be loaded into the system for a quick start-up.
1
Robotic tape application
The RoboTAPE applies the tape fully automatically within 30 sec/sleeve. The spiral taping eliminates tape waste.
2
No air inclusions
The robotic taping eliminates the air bubbles and provides accurate and consistent taping application.
3
Tape roller
The RoboTAPE has a tape roll of 250m length for applying the tape. The width of the tape is 230mm.
4
Taping station
The operator manually loads the sleeve/adapter on the mandrel of the taping station. When the tape application is completed by the robot, he can remove the taped sleeve.
5
Safety fence
The robot is surrounded by a safety fence to protect the operator during the taping process.
6
HMI console
The HMI console is used to set up jobs and start the taping process. XML files can be loaded into the system for a quick start-up.
Caso de negocio
Una compañía de impresión y envasado con una capacidad de 1000 mangas por semana que tiene ahorros enormes de la eliminación del tiempo de inactividad de la imprenta debido a los errores de encintado, los residuos relacionados a la cinta y el ahorro de mano de obra de la manipulación y encintado manuales de las mangas.
![](https://www.flexologic.nl/wp-content/uploads/2020/06/press-downtime-01-ES.png)
![](https://www.flexologic.nl/wp-content/uploads/2020/06/tape-waste-02-02-ES.png)
![](https://www.flexologic.nl/wp-content/uploads/2020/06/labor-savings-03-ES.png)
Características de RoboTAPE & RoboSLEEVE
![push and pull](https://www.flexologic.nl/wp-content/uploads/2020/06/5.push-and-pull-unit.jpg)
Unidad de empujar & tirar
The RoboTAPE carga y descarga suavemente las mangas en la estación de encintado con la unidad de empujar y tirar cubierta de goma.
![gripper tool station](https://www.flexologic.nl/wp-content/uploads/2020/06/2.gripper-tool-station.jpg)
Estación de herramienta de pinza
El RoboTAPE utiliza una herramienta de pinza para manipular mangas y puentes con diferentes diámetros interiores. Todos los tamaños stork entre 240-1240.
![tech cart](https://www.flexologic.nl/wp-content/uploads/2020/06/7.Tech-Cart.jpg)
Tech Cart
El RoboSLEEVE viene con un Tech Cart con una capacidad de hasta 10 mangas. El Tech Cart asegura transporte seguro y sin esfuerzos de las mangas.
![adapter station](https://www.flexologic.nl/wp-content/uploads/2020/06/6.adapter-station.jpg)
Estación adaptador
La estación del adaptador se utiliza para almacenar todos los adaptadores necesarios para los diferentes trabajos y prensas de impresión. El RoboSLEEVE recoge un adaptador y lo carga en la máquina de montaje. Luego continúa con la primera manga del Tech Cart.
Contáctenos
-
-
-
VAT: NL001515561B01
-
PO Box 252
2400 AG Alphen aan den Rijn
Netherlands